Directed-electronics 2.2 Manual de usuario descargar pdf (Pagina 35)

Zone Description Dealer installed options

1 Trunk Pin

2 Instant trigger: a heavier impact

detected by the shock sensor

3 Door switch trigger

4 Instant trigger: For optional

sensors

5 Ignition trigger

6 Hood Pin

➤ Interpreting zone diagnostics

Warn Away responses are not reported by arming or disarming diag-

nostics. If you receive a Bypass notiﬁcation when arming or a Tamper

Alert notiﬁcation when disarming, look at the LED.

Active or triggered zones will be indicated by a pattern of blinks by

the LED.

For example:

If zone 3 was active or triggered, the LED will blink three

times with a two-second pause. Then it will blink three times again, and

repeat until the ignition is turned on.

➤ Nuisance prevention® circuitry

Your system has Directed’s Nuisance Prevention® Circuitry (NPC). It

prevents annoying repetitive trigger sequences due to faulty door pin

switches or environmental conditions such as thunder, jackhammers,

airport noise, etc.

For example:

If the alarm triggers three times within a 60-minute period

and each time the same sensor or switch triggers the alarm, NPC will

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Sin comentarios

Directed-electronics 2.2 Manual de usuario Pagina 35