Directed Electronics 381 Series Guía de instalación descargar pdf (Pagina 18)

To access another feature in the same menu

Press and release the Valet

/Program switch the number of times necessary to advance from the feature you just

programmed to the next one you want to program. Then press the Valet

/Program switch once more and hold it.

For example, if you just programmed the third feature in the menu and you would like to program the seventh fea-

ture in the menu, you would press and release the Valet

/Program switch four times. Then press it once more and

hold it. The siren would chirp seven times to confirm access to the seventh feature.

To select another menu

Press and hold the Valet

/Program switch. After three seconds, the unit will advance to the next menu and the siren

will chirp, indicating which menu has been accessed. For instance, if you just programmed some features in Menu

#1 (Basic Features Menu) and you would like to program a feature in Menu #3 (Auxiliary Channel Outputs Menu),

you press and hold the Valet

/Program switch. After three seconds, the siren chirps twice indicating access to the

second menu. Continue to hold the button and three seconds later the siren would chirp three times. Features in

the third menu are then programmable following Steps 4 through 6 of the Systems Features Learn Routine.

To exit the learn routine

Do one of the following:

1. Close the open door.

2. Turn the ignition on.

3. No activity for longer than 15 seconds.

4. Press the Valet

/Program switch too many times.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Sin comentarios

Directed Electronics 381 Series Guía de instalación Pagina 18