Directed Electronics Valet 561T Guía de instalación descargar pdf (Pagina 25)

2255

ttrraannssmmiitttteerr//rreecceeiivveerr lleeaarrnn rroouuttiinnee

The system comes with two transmitters that have been taught to the receiver. Use the following learn routine to

add transmitters to the system or to change button assignments if desired.

The Valet/Program switch, plugged into the blue port, is used for programming. There is a basic sequence to

remember whenever programming this unit: Door, Key, Choose, Transmit and Release.

OOppeenn aa ddoooorr..

(The GREEN wire, H1/8, or the VIOLET, H1/6 must be connected.)

KKeeyy..

Turn the ignition on. (The H1/4 YELLOW switched ignition input must be connected.)

CChhoooossee..

Press and release the Valet/Program switch the number of times necessary to

access the desired channel, then press the switch once more and Hold it. The siren will

chirp and the LED will blink the number of times corresponding to the channel that has

been accessed.

CCHHAANNNNEELL PPRREESSSS AANNDD RREELLEEAASSEE

NNUUMMBBEERR TTHHEE VVAALLEETT//PPRROOGGRRAAMM SSWWIITTCCHH TTOO PPRROOGGRRAAMM FFUUNNCCTTIIOONN

1 One Time Arm/Disarm/Panic

2 Two Times Channel 2

3 Three Times Channel 3

4 Four Times Channel 4

5 Five Times Arm Only

6 Six Times Disarm Only

7 Seven Times Panic Only

8 Eight Times Auto-learn* (4-button and LCD 2-way transmitters)

9 Nine Times Auto-Learn* (3-button optional transmitter)

10 Ten Times Delete all Transmitters**

**NNOOTTEE::

See Transmitter Configuration section of this guide for a description of Auto-learn

transmitter programming.

****NNOOTTEE::

If any button from a known transmitter is programmed to Channel 10, all transmit-

ters will be erased from memory and the system will revert to the default feature settings.

(See Features Menu section of this guide.)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Sin comentarios

Directed Electronics Valet 561T Guía de instalación Pagina 25