Directed-electronics PYTHON 480XP Manual de usuario descargar pdf (Pagina 11)

2002

Directed Electronics, Inc.

Secondary Harness (H2),

Wire Connection Guide

Secondary Harness (H2) Wiring Diagram

___

Secondary Harness Wire Descriptions

H2/1 GRAY/BLACK (-) Diesel Wait-to-Start Bulb Input

Connect this wire to the wire in the vehicle that sends the signal to turn on the WAIT-TO-START

bulb in the dashboard. In most diesels the wire is negative (ground turns on the bulb) and the

GRAY/BLACK can be directly connected to the wire in the vehicle. If the vehicle uses a positive

wire (12V to turn on the bulb) a relay must be used to change the polarity. (See Finding the Wait-

To-Start Bulb Wire For Diesels section of this guide.) Here are some common colors of this wire:

➤

Chevrolet and GMC trucks: Light Blue or Dark Blue

➤

Ford Trucks: Black/Pink

➤

Dodge Ram Trucks: Orange/Black or Black/Orange

NOTE: A 1-amp diode must be installed in line on the factory wire between the wait-to-start

indicator and the ECM. (See the following diagram for details.)

LIGHT GREEN/BLACK (-) Factory Disarm/Special Accessory

GRAY/BLACK (-) Wait-to-Start Input

H2/1

H2/2

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Sin comentarios

Directed-electronics PYTHON 480XP Manual de usuario Pagina 11