Directed-electronics PYTHON 480XP Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 36
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
©
2002
Directed Electronics, Inc.
15
H3/4 BROWN (+) Brake Switch Input
This wire MUST be connected to the vehicle's brake light wire. This is the wire that shows (+) 12V
when the brake pedal is pressed. The remote start will be disabled or shut down any time the brake
pedal is pressed.
H3/5 VIOLET/WHITE Tachometer Input
This input provides the module with information about the engine's revolutions per minute
(RPMs). It can be connected to the negative side of the coil in vehicles with conventional coils. In
multi-coil and high energy ignition systems locating a proper signal may be more difficult. (See
Installation Points to Remember section of this guide for finding the tachometer wire.) Once
connected, you must teach the system the tach signal. (See Tach Learning section of this guide.)
H3/6 BLACK/WHITE Neutral Safety Switch Input
Connect this wire to the toggle (override) switch as shown in Figure A. Connect the other wire from
the toggle switch to the park/neutral switch in the vehicle. This wire will test with ground with the
gear selector either in PARK or NEUTRAL. This will prevent the vehicle from accidentally being
started while in a drive gear. This input MUST rest at ground in order for the remote start system
to operate. Connected properly the vehicle will only start while in PARK or NEUTRAL.
In some vehicles, the park/neutral position switch activates a factory starter lock out that will not
allow the starter to operate in a drive gear. In these vehicles, connect this wire to the toggle switch
as shown in Figure B. Connect the other wire from the toggle switch to chassis ground.
Figure A Figure B
IMPORTANT! Always perform the Vehicle Safety Check section of this guide to verify
that the vehicle cannot be started in ANY drive gear and that the override switch is
functioning properly.
IMPORTANT! DO NOT use T-Taps or scotch locks for this connection.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comentarios a estos manuales

Sin comentarios

Talos-security BX700WICR Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Kamerarekorder Talos-security BX700WICR.
Wir stellen 1 PDF-Handbücher Talos-security BX700WICR zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung






Weitere Produkte und Handbücher für Kamerarekorder Talos-security

Modelle Dokumententyp
DC700WICR Bedienungsanleitung   Talos Security DC700WICR User Manual, 2 Seiten
DC650F Bedienungsanleitung   Talos Security DC650F User Manual, 2 Seiten
BD700V Bedienungsanleitung   Talos Security BD700V User Manual, 2 Seiten
BD700 Bedienungsanleitung   Talos Security BD700 User Manual, 2 Seiten
DC960V Bedienungsanleitung   Talos Security DC960V User Manual, 2 Seiten
DV700WICR Bedienungsanleitung   Talos Security DV700WICR User Manual, 2 Seiten
DVM620F Bedienungsanleitung   Talos Security DVM620F User Manual, 1 Seiten