Directed Electronics Matrix 1 Guía de instalación descargar pdf (Pagina 22)

Menu #2 - Advanced Features

Feature One Chirp Two-Chirp

Number Setting Setting

2-1 Siren Horn honk

2-2 30-second siren duration 60-second siren duration*

2-3 False Alarm Control Technology ON FACT II ™ OFF

2-4 Progressive door trigger Instant door trigger

2-5 Valet switch input: 1 pulse Valet switch input: 2-5 pulses

2-6 Bypass Notification ON Bypass Notification OFF

2-7 Ignition-controlled domelight ON Ignition-controlled domelight OFF

2-8 Single unlock pulse Double unlock pulse

2-9 Single lock pulse Double lock pulse

2-10 Channel 3: Validity Channel 3: latched/latched, reset

with ignition/30-second timed/

second unlock output*

2-11 Comfort Closure (On) (20 sec.) Comfort Closure (Off)

*The Bitwriter allows programming from 1-180 seconds.

*Second unlock is only available if Feature 2-8 is programmed to single pulse.

Feature Descriptions

The features of the system are described below. Features that have additional

settings that can be selected only when programming with the 998T Bitwriter

are indicated by the following icon:

Menu #1 - Basic Features

1-1 ACTIVE/PASSIVE ARMING: When active arming is selected, the

system will only arm when the transmitter is used. When set to passive, the

system will arm automatically 30 seconds after the last door is closed. To alert

the consumer of passive arming, the siren will chirp 20 seconds after the door is

closed. This provides the consumer with an audible prior to the system actually

arming. At the 30 second mark, the system will arm but the siren will not

chirp.

1-2 Chirps ON/OFF:

This feature controls the chirps that confirm the

arming and disarming of the system.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Sin comentarios

Directed Electronics Matrix 1 Guía de instalación Pagina 22