Directed Electronics Matrix 1 Guía de instalación descargar pdf (Pagina 26)

2-8 DOUBLE PULSE UNLOCK ON/OFF: Some vehicles require two

pulses on a single wire to unlock the doors. When the double pulse unlock

feature is turned on, the BLUE H2/C wire will supply two negative pulses

instead of a single pulse. At the same time, the GREEN H2/A wire will supply

two positive pulses instead of a single pulse. This makes it possible to directly

interface with double pulse vehicles without any extra parts.

2-9 Double/Single Pulse Lock: Some vehicles require two pulses on a single

wire to lock the doors. When the double pulse lock feature is turned on, the

BLUE H2/C wire will supply two positive pulses instead of a single pulse. At

the same time the GREEN H2/A wire will supply two negative pulses instead

of a single pulse. This makes it possible to directly interface with double pulse

vehicles without any extra parts.

2-10 CHANNEL 3 VALIDITY/LATCHED/LATCHED RESET WITH

IGNITION/30 SECOND TIMED/SECOND UNLOCK OUTPUT:

Channel 3 can be programmed for these output configurations. The unit is set

to the default validity output. To change the configuration use the two-chirp

setting to toggle to the different configurations.

2-11 COMFORT CLOSURE: The system can be programmed to close the

windows when the system is armed. A 20-second output starts 200mS after the

last



button pulse. The comfort closure output will be cancelled if the



button is pressed. If programmed ON, the lock output wire will provide this

function.

NOTE: Comfort closure is deleted if one-time bypass is activated.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Sin comentarios

Directed Electronics Matrix 1 Guía de instalación Pagina 26