Directed Electronics AutoCommand 25622 Manual de instalación descargar pdf (Pagina 12)

AutoCommand Keyless Entry Notes Sheet Without Relays.doc 9/7/2004

Remote Car Starter Keyless Entry Notes Sheet for Model #s 28624T & 28628

Thank you for purchasing DesignTech unit that offers keyless entry features. Proper installation will result in

years of trouble free keyless operation including locking and unlocking your vehicle’s door locks and trunk control.

Please read these instructions completely prior to beginning connection to the vehicle’s locks and trunk.

GENERAL GUIDELINES AND CAUTIONS:

• Obtain a vehicle wiring sheet for your specific vehicle indicating the location, colors and types of locks and trunk

system that you will be working with. Please note that it may be necessary for you to purchase external relays

and/or diodes and resistors that are not included with your product. Please visit the DesignTech website at

www.designtech-intl.com

• When testing for lock/ unlock/ trunk wires, closely follow the instructions and when checking electrical

connections, use a test meter (multi-meter, voltage meter, etc.), DO NOT use a test light. It is easy to

accidentally damage the circuitry in modern vehicles testing for wires with a test light.

• The better you make your connections, the more reliable your system will be. We recommend soldering all

connections.

• All chassis ground wires must go to clean, bare metal surfaces. Always test the spot you have chosen for ground

connections to make sure it is a good ground. Pieces of metal supporting or attached to the underside of the

dashboard are not good locations. The best spot is usually in the kick-panel.

• Some door lock circuits will require that up to three wires on the DesignTech module be attached to +12 volts.

When doing this, connect all these wires together and then put the fuse on the main wire so that all wires are

protected with the fuse.

NEGATIVE TRIGGERED DOOR LOCK SYSTEMS

This circuit style is common to

most Japanese cars and some

European cars as well. In this

circuit the door lock/ Unlock

switch activates a relay which in

turn activates the lock/ unlock

motors in the car doors. The

DesignTech module will be

connected so that it provides a

negative pulse to the

appropriate wires to lock or

unlock the doors.

Testing for this type system is

very simple. First, check the

Keyless Entry wiring guide and

determine the color and location

of the lock wires in the vehicle

you are working on. Set your

test meter on continuity (or

ohms) and clip or attach one of

the probes to the cars chassis.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comentarios a estos manuales

Sin comentarios

Directed Electronics AutoCommand 25622 Manual de instalación Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Arrancadores remotos Directed Electronics AutoCommand 25622