Directed Electronics Viper ESP 540 Guía de instalación descargar pdf (Pagina 38)

5. Within 5-seconds, press and release the Valet switch the number of

times corresponding to the desired feature listed below. Then press the

Valet switch one more time and hold. The siren/horn will sound the num-

ber of times equal to the feature number selected.

6. While holding the Valet switch, assign the selected feature to a

factory button.

Press Lock for 1 short siren chirp/horn honk, or press Unlock for 2 short

siren chirps/horn honks.

Once a feature is programmed

Other features can be programmed.

Other feature menu can be selected.

Learn Routine can be exited.

Accessing additional features

Release, then press and release the Valet switch the number of times

to advance from the feature just programmed to the next feature

desired.

Press and hold the Valet switch once more.

The siren chirps/horn honks to confirm the feature selected.

Important: Horn honks apply only if the horn

wire is connected.

N3001L_2009-04print.qxd 5/12/2009 11:14 AM Page 32

25-Mar-10

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 177 178

Sin comentarios

Directed Electronics Viper ESP 540 Guía de instalación Pagina 38