Directed Electronics Viper ESP 540 Guía de instalación descargar pdf (Pagina 58)

Turn ignition to “on” position, then

turn to “off” position. Press

and release the Valet

switch

within 10 seconds. The status

LED will light steady if you

have entered Valet

Mode. To exit Valet

Mode, repeat the steps above.

The LED will turn off when exiting Valet

Mode.

remote valet

Remote Valet

is a convenient feature that makes bypassing the securi-

ty system easier. This feature makes it possible to exit or enter Valet

Mode using your factory keyless transmitter.

1. Open any door.

2. Press LOCK on the transmitter.

3. Press UNLOCK on the transmitter.

4. Press LOCK on the transmitter.

The status LED will stay on if you have entered Valet

Mode, and it will

go out if you exited Valet

Mode.

panic mode

If you are threatened in or near your vehicle, you can attract attention

by triggering the system with your transmitter! If your factory keyless

transmitter does not have a panic button, this system can be pro-

grammed to enable a panic feature (refer to the Programming Options).

nnoottee::

The remote Valet

feature will not work with all factory

keyless entry systems. Some keyless entry systems do not

work with a door open.

DRW-35

G427V_01-05.qxd 12/31/2004 12:44 PM Page 6

25-Mar-10

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 177 178

Sin comentarios

Directed Electronics Viper ESP 540 Guía de instalación Pagina 58